Skip to content

Custom Carbon Fiber Drone Frame

A multirotor frame holds the motors around a central area for the controller, battery and payload. Our carbon frame parts include one-piece plates, replaceable flat arms and tube-arm structures, with custom motor spacing, equipment openings and mounting holes.

Flat woven carbon X-shaped UAV main plate with four motor pads, central equipment openings and machined mounting slots

Integral quad main plate with defined motor pads and center-stack openings.

Choose your drone frame

Integral quad main plate

Integral quad main plate

This one-piece plate has four motor pads and openings for the center equipment stack.

Replaceable flat-arm kit

Replaceable flat-arm kit

The flat arms attach between separate center plates, so a damaged arm can be replaced on its own.

Tube-arm inspection frame

Tube-arm inspection frame

Carbon tube arms connect to the central equipment deck through separate brackets.

Six-arm equipment frame

Six-arm equipment frame

Six arms surround a central mounting area for onboard equipment.

Frame parts for your drone layout

Cut plates and arm sections

Flat carbon plates can combine the center section and arms in one piece, or form separate parts for a bolted frame.

Motor and equipment mounts

We provide hole patterns and mounting areas for motors, controllers, batteries and payload equipment.

Plate thickness and layup

Plate thickness, fiber direction and local reinforcement follow your frame specification.

Drone-frame layout and mounting

Motor positions and center openingMotor spacing is measured between the two upper motor-pad centers. The center opening accommodates the equipment stack. The opening diameter in one motor pad is shown separately from the motor-fixing hole pattern.Motor spacingCenter openingMotor-pad bore diameter

Motor positions and center opening

Motor spacing is measured between the two upper motor-pad centers. The center opening accommodates the equipment stack. The opening diameter in one motor pad is shown separately from the motor-fixing hole pattern.

Four-arm frame with central equipment plate and separate plate and landing attachment references

Arm roots and equipment plates

Arm-root joints connect separate arms to the center plates. Other mounting areas carry the controller, battery and landing attachments.

All Carbon Fiber

Carbon Fiber Drone Frame

Flat woven carbon X-shaped UAV main plate with four motor pads, central equipment openings and machined mounting slots

Integral quad main plate with defined motor pads and center-stack openings.