Carbon Fiber Steering-Wheel Trims
Carbon inserts finish the visible faces of the steering-wheel spokes and the surrounds around its buttons. Separate left, right and lower pieces can form a matching set, or a thin overlay can cover the existing trim. The wheel structure, controls and airbag remain separate systems, with their required clearances retained.

Three hollow carbon steering wheel inserts with handed upper surrounds, a lower piece and visible mounting tabs.
Image credit: ·
Steering-wheel trim sets

Three-piece spoke insert set
The left and right button surrounds and lower spoke insert form a matching set.

Lower spoke insert
This single carbon insert for the lower spoke has tabs that fix to the existing mounts.

Handed button-surround pair
The left and right frames surround the original button modules.

Defined decorative overlay
This thin carbon overlay fits over the existing decorative trim.
Steering wheel trim customization
Spoke-insert molding
We mold the face curvature and returned edges from your original trim.
Controls and tabs
Openings leave the original button modules accessible, while concealed tabs attach the replacement inserts to the wheel carrier.
Matching weave
The carbon direction and surface sheen are matched across the left, right and lower pieces.
Wheel insert and retaining tabs
Face width, opening and tabs
Width measures the main trim face, excluding the projecting tabs. Opening height is measured between the upper and lower edges. Tab spacing runs between the two marked fixing-hole centers.

Returned opening and fixing tabs
The control opening has a returned edge, and two upper tabs with holes fix the insert to the existing wheel carrier and button module.


