Skip to content

Carbon Fiber Trunk-Lid Panels and Skins

A carbon trunk-lid skin forms the upper and rear exterior faces of the luggage-compartment lid. Its rear edge can remain plain or rise into a lip, with openings for the handle, camera, lamps or lock. The skin is available alone or with a separate inner support frame for the closure hardware.

Detached carbon trunk lid skin with a raised lip, rear equipment opening and shallow returned edges.

Detached carbon trunk lid skin with a raised lip, rear equipment opening and shallow returned edges.

Trunk-lid panel options

Outer skin with raised trailing lip

Outer skin with raised trailing lip

This outer skin has a raised lip along the rear edge.

Plain outer lid skin

Plain outer lid skin

This plain outer skin has a low upper curve and shallow returned edges.

Skin with separate inner support

Skin with separate inner support

This outer skin has a separate inner support frame made to your lid design.

Lid with controlled equipment openings

Skin with equipment openings

This lid skin has openings for the handle, camera, lamp or lock in your layout.

Trunk lid customization

Lid-skin molding

The upper curve, rear face and edge returns are molded from your lid reference.

Equipment openings

The openings for the handle, camera, lamps and lock are cut to your lid layout.

Inner support frame

A separate inner frame supports the outer skin and provides the mounting areas used by the hinge and latch arrangement.

Trunk lid contour and openings

Lid plan and lock cutoutThe plan marks the full lid span and front-to-back depth. Lock-center offset is measured horizontally from the leftmost outer edge to the marked center of the round cutout.Lid spanLid plan depthLock center offset

Lid plan and lock cutout

The plan marks the full lid span and front-to-back depth. Lock-center offset is measured horizontally from the leftmost outer edge to the marked center of the round cutout.

Trunk-lid panel with hinge contact areas, handle opening and round lock cutout

Hinge areas and equipment cutouts

A supported lid includes hinge attachment areas, while the exterior skin can carry the handle opening and lock cutout. Hinges, latch and other fitted hardware remain separate parts.

All Carbon Fiber

Carbon Fiber Trunk Lid Panel

Detached carbon trunk lid skin with a raised lip, rear equipment opening and shallow returned edges.

Detached carbon trunk lid skin with a raised lip, rear equipment opening and shallow returned edges.