Skip to content

Fiberglass Tree Grille Covers

Fiberglass grating panels cover a tree pit while leaving clearance around the trunk. The outer shape, trunk opening and lift-out sections can be cut to fit the pit and its separate support frame. Panel depth and support spacing follow the pedestrian-load design; walking-face texture and color are separate finish choices.

Yellow fiberglass tree-pit grating in two halves with a square central growth opening.

Yellow fiberglass tree-pit grating in two halves with a square central growth opening.

Tree-grille cut layouts

Square opening in two halves

Square opening in two halves

Two grille halves meet around a square central trunk opening.

Circular growth opening

Circular growth opening

A round opening is sized to the trunk, set within a square grille.

Four lift-out quarters

Four lift-out quarters

Four quarters rest on the support frame and lift out separately for pit access.

Narrow verge surround

Narrow verge surround

A long, narrow grille has an offset trunk opening for a verge beside a curb or building.

Tree-pit grille customization

Pit and trunk openings

Square, round or offset trunk openings are cut within the chosen grille outline.

Lift-out sections

The cover can be divided into two halves or four quarters, with each section sized to the support frame for lift-out access.

Walking surface and color

The walking face can use inward-curving rib tops or an applied grit texture. Color can be selected to complement the surrounding paving.

Tree opening and lift-out grille

Grille footprint and trunk clearanceThe plan measures the cover’s outer width and length, plus the clear width of the trunk opening. The trunk-opening size can allow for the growth clearance set in the landscape plan.Grille widthGrille lengthTree opening width

Grille footprint and trunk clearance

The plan measures the cover’s outer width and length, plus the clear width of the trunk opening. The trunk-opening size can allow for the growth clearance set in the landscape plan.

Rectangular tree grille with repeated grid openings, a large central tree opening and separate bearing supports below its edges

Grid panels on separate edge supports

Each lift-out section rests on the separately specified support frame. Cut perimeter and trunk-opening edges can be sealed after trimming.

All Outdoor FRP

Fiberglass Tree Grille Cover

Yellow fiberglass tree-pit grating in two halves with a square central growth opening.

Yellow fiberglass tree-pit grating in two halves with a square central growth opening.