Skip to content

Custom Fiberglass Front Lip Spoilers

A fiberglass front lip extends the lower profile of the bumper. It can sweep across the full width or divide into corner and center pieces, with custom forward projection and raised ends. The shape follows the vehicle design; its aerodynamic performance depends on the complete installation.

White fiberglass front bumper lip with raised corner returns and a separate thin lower extension

Detached molded lip and lower extension showing edge steps, mounting holes and the inner laminate.

Choose your lower-lip shape

Continuous swept lip

Continuous swept lip

One molded lip follows the bumper base from side to side, with curved returns at both corners.

Split corner extensions

Split corner extensions

Left and right sections leave a center gap or meet a separate center piece.

Separate lower extension

Separate lower extension

A lower strip attaches beneath the main lip and has its own returned edge. It can be removed without taking off the main lip.

Raised corner returns

Raised corner returns

Taller returns run up both bumper corners, carrying the lip profile onto the body face.

Customize the lower bumper profile

Lip molds

Molds reproduce your sweep, forward projection and corner returns, as one part or matching sections.

Bumper fitting

Turned edges, fixing holes and mating faces are made to fit your bumper underside, using the pads, seals or adhesive you specify.

Removable strip and surface appearance

Detachable lower strips match the main lip, with trimmed fixing areas and paint-ready or finished faces and edges.

Lip sweep and installed clearance

Span, projection and ground clearanceSpan measures across the bumper. In the lower side section, forward projection runs from the bumper's vertical front face to the lip's leading edge. Ground clearance runs from the installed lower edge to the road and varies with the vehicle's position and operating conditions.Lip spanForward projectionGround clearance

Span, projection and ground clearance

Span measures across the bumper. In the lower side section, forward projection runs from the bumper's vertical front face to the lip's leading edge. Ground clearance runs from the installed lower edge to the road and varies with the vehicle's position and operating conditions.

Continuous swept front lip with tall returned corner ends and marked contact positions across the lower band

Swept lower lip with tall corners

A continuous fiberglass lip can curve across the bumper base and rise at both corners in your chosen end profile.

All Vehicle FRP

FRP Front Lip Spoiler

White fiberglass front bumper lip with raised corner returns and a separate thin lower extension

Detached molded lip and lower extension showing edge steps, mounting holes and the inner laminate.