Skip to content

Custom Fiberglass Motorhome Rear Caps

Fiberglass rear caps form the outer back panel of a motorhome, with rounded returns that meet the roof and sidewalls. The face can include tail-lamp recesses, a rear-window opening and removable service panels. Ladders and carriers require structural supports behind the cap.

Tall gray primed fiberglass motorhome rear cap with three round lamp positions on each side and a lower service opening

Rear-cap shell showing its curved roof return, lamp positions, central service recess and lower access notch.

Rear-cap options

Lamp and service cap

Lamp and service cap

One rear shell has paired tail-lamp areas and a shaped service section molded into the lower face.

Rear window aperture

Rear window aperture

A rear-window opening sits within the cap, with trimmed edges matching the selected glazing and seal profile.

Removable service door

Removable service door

The lower access panel has returned edges for the hinges, latch and seals you specify.

Roof transition and separate lower panel

Roof transition and separate lower panel

The upper roof-transition shell and lower panel are separate parts. The lower panel can be removed without taking off the upper cap.

Customize the rear cap

Rear-profile molds and returns

Custom tooling forms the tall rear face, rounded roof corners and side returns made to your motorhome body sections.

Lamps, windows and access doors

Lamp pockets, glazing surrounds and access panels can be molded for the selected fittings.

Split sections and surface appearance

Upper and lower sections can be molded separately for a divided cap. Surfaces can be supplied ready for paint or finished to match adjacent body panels.

Rear-cap size and lower access

Cap size and tail-lamp positionsThe rear view shows the cap's overall width and height. Lamp spacing is measured between the centers of the left and right lamp positions.Rear cap widthRear cap heightLamp spacing

Cap size and tail-lamp positions

The rear view shows the cap's overall width and height. Lamp spacing is measured between the centers of the left and right lamp positions.

Rounded rectangular motorhome rear cap with a lower service aperture, inset body-contact line and marked perimeter references

Rounded rear face with a lower opening

The cap can include a lower access opening with returned edges, and rounded outer corners shaped to meet your roof and side panels.

All Vehicle FRP

FRP Motorhome Rear Cap

Tall gray primed fiberglass motorhome rear cap with three round lamp positions on each side and a lower service opening

Rear-cap shell showing its curved roof return, lamp positions, central service recess and lower access notch.