Skip to content

Product Sampling Booths

We manufacture fiberglass booth shells for product-sampling campaigns. The demonstration counter, display niches and staff-side stock door are molded around your product sizes and serving routine, with graphic areas and any equipment or sink openings you specify. Contact surfaces, sinks and demonstration equipment are specified separately.

Terracotta fiberglass campaign shell with an empty open service mouth, raised hatch and left staff door

Empty demonstration shell with a clear handover opening and separate staff entry.

Sampling booth formats

Open sampling hatch

Open sampling hatch

A supported hatch lifts above the counter to leave a clear opening for demonstrating and handing out samples.

Counter and display niches

Counter and display niches

Recessed niches display the product beside the counter and keep the handover surface clear.

Two-person campaign face

Two-person campaign face

Two counter zones let one operator demonstrate while another hands out samples.

Replenishment-side entry

Staff entry and stock layout

A dedicated staff doorway gives access to the stock area, with the counter and any wet-cleaning fit-out arranged around the replenishment route.

Sampling booth customization

Counter and display niches

The demonstration counter and recessed display niches are molded to your product sizes, with counter supports sized for the loads you specify.

Staff and stock access

Staff-side doors, hatch fittings and display mounting points are arranged around your equipment and restocking routine.

Graphics, lighting and wet areas

Replaceable graphic areas and lighting mounts let one shell carry different campaigns. Sink and drain openings are added only where you specify them, with your choice of shell color and inner lining.

Demonstration counter and sample handover

Booth, counter and handover apertureThe elevation omits the hatch leaf and stays to show the handover aperture. Counter height is measured to the booth base; a plinth or installed flooring changes the working level. The fitted hatch hardware determines the final usable opening.Booth widthCounter heightHandover aperture width

Booth, counter and handover aperture

The elevation omits the hatch leaf and stays to show the handover aperture. Counter height is measured to the booth base; a plinth or installed flooring changes the working level. The fitted hatch hardware determines the final usable opening.

Sampling booth with a front demonstration opening, deep projecting counter edge and adjacent full-height staff doorway

Sample counter and staff-side access

The demonstration opening and projecting counter provide the public handover point. An adjacent full-height doorway gives staff access to the interior.

All FRP Booths

FRP Product Sampling Booth

Terracotta fiberglass campaign shell with an empty open service mouth, raised hatch and left staff door

Empty demonstration shell with a clear handover opening and separate staff entry.