Skip to content

Custom Carbon Fiber Hood Panel

A carbon hood panel forms the outer surface over the engine bay. We can supply an exterior skin or a panel with inner ribs and hinge and latch mounting areas. The face can stay smooth or incorporate vents, a raised scoop or a recessed inlet.

Detached woven carbon-fiber hood panel with central scoop and two lower vent openings on a gray surface

Carbon hood face with defined vents and trimmed perimeter.

Hood panel options

Continuous exterior skin

Continuous exterior skin

This smooth outer skin is shaped along the fender and cowl edges.

Defined vent openings

Defined vent openings

Vent openings interrupt the outer face in the positions and shapes used by the hood design.

Center scoop arrangement

Center scoop arrangement

The center section can rise into a scoop or form a recessed inlet, with a custom opening profile.

Inner support and bolt lands

Inner supports and mounting areas

The inner ribs and mounting areas are laid out for your hinge and latch arrangement.

Hood panel customization

Outer skin molding

The face curvature and the fender and cowl edges are molded to your hood reference.

Inner support details

An exterior skin can be supplied on its own, or combined with backside ribs and mounting areas for separate hinge and latch hardware.

Weave and clear protective coating

The carbon weave is aligned across the face with a gloss or satin clear finish.

Hood shape and underside details

Hood size and hinge spacingThe plan view shows the hood's overall width and length. On a panel with inner supports, hinge spacing is measured between the marked centers of the two rear mounting areas.Hood widthHood lengthHinge spacing

Hood size and hinge spacing

The plan view shows the hood's overall width and length. On a panel with inner supports, hinge spacing is measured between the marked centers of the two rear mounting areas.

Hood underside with two rear hinge areas, a front latch area and connecting support ribs

Hinge, latch and rib areas

On the underside, the rear hinge areas, front latch area and connecting ribs are placed to suit your hood hardware and support layout.

All Carbon Fiber

Carbon Fiber Hood Panel

Detached woven carbon-fiber hood panel with central scoop and two lower vent openings on a gray surface

Carbon hood face with defined vents and trimmed perimeter.