Boomerang Water Slide Sections
A boomerang slide uses an upswept reverse wall connected to approach and return channels. Our fiberglass supply covers those molded panels and transitions, made to the ride geometry with coordinated joints and colors. Replacement wall panels can be matched to the neighboring sections.

Red and yellow fiberglass approach trough rising into a reverse wall beside a steel slide tower
Image credit: ·
Boomerang-slide components

Upswept reverse wall
A broad curved wall rises from the approach trough.

Broad approach trough
A wide straight approach trough is sized for the raft in your design.

Return transition
A transition section connects the reverse wall to the level return flume.

Replaceable wall segment
A single curved wall panel is made to match the adjoining sections.
Boomerang-slide panel customization
Curved reverse wall
Broad upswept panels are formed to the reverse-wall shape in the ride model.
Channel joints and contacts
Panel edges, flanges and mounting areas follow the joints between the wall, approach trough and return channel.
Color bands and replacement panels
A color scheme can continue across the wall panels. Replacement pieces are matched to the existing panel and joint references.
Reverse-wall shape and approach channel
Wall rise and approach width
The elevation measures the module’s horizontal span and wall rise above the approach riding surface. The lower section measures the clear width between the trough’s inner walls. These references do not replace the complete curved ride model.

Wall panels and lower transition
A broad upward curve can be supplied as joined panels with a matching lower approach channel.


