Water Slide Runout Troughs
These fiberglass trough sections form the open runout at the end of a water slide. We mold straight channels, tube-to-open transitions and end sections for the specified drains and exit steps. Runout length and floor slope follow the slide designer's drawing.

Three parallel molded fiberglass runout troughs with tube-mouth transitions, terminal grates and exit steps.
Image credit: ·
Runout trough sections

Straight guided trough
A straight open channel has returned upper edges and the floor slope given in your drawing.

Tube-to-open transition
A molded transition connects the enclosed slide tube to the open trough.

Flanged runout modules
End flanges join the runout modules, allowing a long trough to be delivered in shorter sections.

Terminal and drain set
The terminal section is shaped for the specified drain grates, exit steps and water-return fittings.
Custom slide runout troughs
Open channel shape
Straight sections have the length, width and floor profile shown on your runout drawing.
Tube inlet transition
A molded transition joins the enclosed slide outlet to the open channel.
Drain and exit details
An end section has seats for the specified grate, drain openings and exit steps.
Runout-trough size and joined sections
Trough length and inlet-floor height
The plan marks overall trough length and clear channel width. The lower section shows the inlet-floor height above the illustrated installation datum; that level and the floor slope follow the slide design.

Straight joined trough sections
Raised sidewalls run along each open section. Matching end flanges join the sections into a continuous trough.


