Skip to content

FRP Splash Pad Components

Our fiberglass splash-pad parts include slide sections, open runouts, decorative panels and spray-feature covers. We shape each part around the supporting structure and water fittings specified for the project. The water-play designer sets the play-area safety layout.

Spray-play structure with a blue enclosed fiberglass flume and open runout above a drained wet pad.

Splash-pad layout reference for custom chute sections, open runouts and decorative covers. The tipping bucket, spray fittings and supporting frame belong to the separately specified equipment package.

Splash-pad component options

Enclosed chute modules

Enclosed chute modules

Short enclosed chute sections are joined at ring joints, running from the deck entry to the open runout.

Open runout shell

Open runout shell

An open runout shell has raised side returns and a molded outlet lip.

Removable theme panels

Removable theme panels

Decorative panels and pipe covers can be removed to reach the equipment behind them.

Spray-feature shells

Spray-feature shells

The shell fits around a separately supplied spray post or nozzle, with service access near the base.

Custom splash-pad parts

Chute and cover molding

Tube bends, runout profiles and decorative covers are molded to your play-area drawing.

Mounting and access openings

Fixing areas and removable openings are placed to clear the posts, pipes and nozzles and to give access for routine maintenance.

Themed surface appearance

Character details and colors are matched across chutes, panels and spray-feature covers.

Chute route and open runout

Chute side profile and open sectionThe upper side view measures the full horizontal run and the runout length from the tube joint to the outlet. Tube height is measured from the finished pad to the top of the chute; it is separate from the entry riding-floor level. The lower U section shows the open runout profile. The full riding geometry follows the water-play design.Ground runOverall tube heightRunout length

Chute side profile and open section

The upper side view measures the full horizontal run and the runout length from the tube joint to the outlet. Tube height is measured from the finished pad to the top of the chute; it is separate from the entry riding-floor level. The lower U section shows the open runout profile. The full riding geometry follows the water-play design.

Curved tube-slide modules connected to an open runout channel with visible end joints

Tube joints and runout transition

Short curved tube modules join the open runout at shaped end joints, so the route can be built from sections that fit your layout.

All Pool Products

FRP Splash Pad Components

Spray-play structure with a blue enclosed fiberglass flume and open runout above a drained wet pad.

Splash-pad layout reference for custom chute sections, open runouts and decorative covers. The tipping bucket, spray fittings and supporting frame belong to the separately specified equipment package.