FRP Chemical Process Tank Covers
We make sectional fiberglass covers that fit the rim and supports of your open process tank. Hinged hatches give access to service points without removing the main panels, and reinforced openings take vent or extraction connections. The resin construction is selected for the chemicals and cleaning conditions you specify.

Hinged service lid, recessed access opening and returned cover sealing contacts.
Image credit: ·
Process-tank cover options

Rectangular panels
Separate panels span the rectangular opening between the tank supports.

Round segments
Cover segments fit around the supporting rim of a round tank.

Hinged service hatch
A hinged hatch opens a local service area without removing the main panels.

Vent connection panel
A reinforced section carries the vent or extraction opening in the cover.
Tank cover fabrication
Reinforced panel molding
Cover sections are molded to your rim and support layout, with added reinforcement around hatches and pipe openings.
Joints and hatch fitting
Joining edges and openings are trimmed for the gaskets, fasteners and removable hatches you specify.
Resin and corrosion barrier
Resin and corrosion-barrier construction are chosen for your process chemicals, temperatures and cleaning methods.
Cover spans and openings
Supported cover and openings
The plan measures clear span between the inner edges of the two dashed bearing bands beneath the cover. Hatch width and the separate vent diameter use the actual opening edges. Panel thickness and reinforcement depend on this span and the specified loads, including any foot traffic.

Section joints and removable hatch
Cover sections meet at panel joints, with a separate lift-up hatch lid and a round vent opening placed to suit your tank layout.


