Skip to content

FRP Chemical Pump Guards

A fiberglass pump guard covers the coupling area with an open arch or removable split sections. The shape, base fixings and openings follow the machinery's guard design, with resin and surface construction chosen for splash and cleaning exposure.

Empty yellow arched fiberglass coupling guard with open underside and two flat outward mounting flanges.

Curved coupling clearance and accessible base flanges.

Pump guard options

Lift-off arched guard

Lift-off arch

A one-piece arch lifts clear of the coupling after releasing its base fixings.

Split shaft-entry guard

Split guard

Split sections provide a different removal route where surrounding equipment restricts a full lift-off.

Ventilated coupling cover

Vented coupling cover

A slotted cover surrounds the coupling with ventilation openings from the machinery design.

Pump-area splash cover

Splash cover

A deeper shell surrounds the selected splash area with drain and service openings.

Pump guard manufacturing

Guard section molding

Each guard section is molded with stiffened edges and reinforced base attachments.

Shaft and vent trimming

Shaft openings, vent slots and drain reliefs are cut within the limits set by the machinery guard drawing.

Splash-facing surface appearance

The resin and surface construction are specified for splash and washdown exposure, with the exterior finished in the chosen identification color.

Coupling clearance and fixings

Coupling clearance and baseThe cross-section measures width between the inner walls and height from the base contact plane to the inner crown. Fixing spacing joins the marked hole centers in the two outward flanges.Inner clearance widthOpening heightFixing spacing

Coupling clearance and base

The cross-section measures width between the inner walls and height from the base contact plane to the inner crown. Fixing spacing joins the marked hole centers in the two outward flanges.

Open-ended arched pump guard with upper vent slots, outward base flanges and a small lower edge relief

Arched shell and base flanges

An open-ended arch has upper vent slots, flat outward flanges for base fixing and a small relief in the lower edge.

All Industrial FRP

FRP Chemical Pump Guard

Empty yellow arched fiberglass coupling guard with open underside and two flat outward mounting flanges.

Curved coupling clearance and accessible base flanges.