Skip to content

FRP EV Charger Enclosures

These empty fiberglass housings form the outer shell of pedestal, cabinet or wall-mounted EV chargers. Display and reader cutouts, connector recesses and removable panels can be arranged around the charging modules, cooling paths and cable routes.

Slender empty charger casing with blue cap and open black display bezel

Pedestal charger shell with display and connector recesses, a lower access panel and base fixings. Charging modules and electrical equipment are specified separately.

EV charger housing options

Slender charging pedestal

Charging pedestal

A slim pedestal shell combines the display surround, connector recess and lower service opening.

Broad cabinet front

Broad cabinet front

A wider cabinet face has separate areas for the display, connectors and service doors.

Wall-mounted casing

Wall-mounted casing

A compact housing on a separate wall bracket has a removable front.

Rear service section

Rear service panel

A removable rear or side section gives access to the OEM module and cooling components.

Charger housing manufacture

Shell and panels

Outer housings and removable panels are molded with reinforced areas for the base, brackets and connector mounts.

Screen and connector openings

Display, reader and control cutouts are trimmed to your chosen components, with passages for cooling air and cables.

Exterior surface appearance

The front, side and service panels share the selected color and gloss. Cutout edges are finished for the adjoining frames, fittings or seals.

Display opening and base fixing

Display and base positionsScreen-opening width spans the clear cutout. Display center height runs from the underside of the mounting base to the opening center, and base-fixing spacing is measured between the two illustrated hole centers.Screen opening widthDisplay center heightBase fixing spacing

Display and base positions

Screen-opening width spans the clear cutout. Display center height runs from the underside of the mounting base to the opening center, and base-fixing spacing is measured between the two illustrated hole centers.

Tall charger shell with two front rectangular openings, an open lower service door and side rectangular and circular cutouts

Front cutouts, service door and cable exits

Two front openings for the screen and reader, a lower service door and side cable exits are cut to your OEM layout.

All Industrial FRP

FRP EV Charger Enclosure

Slender empty charger casing with blue cap and open black display bezel

Pedestal charger shell with display and connector recesses, a lower access panel and base fixings. Charging modules and electrical equipment are specified separately.