Fiberglass Facade Corner Wrap Panels
Molded fiberglass corner wraps continue the facade finish around an outside or inside corner in one piece. Sharp or rounded turns, unequal side widths and left- or right-hand versions follow your measured corner and panel layout.

An L-shaped fiberglass corner-wrap sample showing its two faces and reverse return.
Image credit: Wessex Building Products ·
Choose your corner shape

Sharp external wrap
Two flat faces wrap an outside corner, with widths and joint positions taken from your plan.

Rounded corner wrap
A molded radius softens the turn between the two facade faces, with space behind for the backing.

Unequal-face return
One side runs longer to meet your panel grid or an opening, with left- and right-hand versions marked.

Recessed internal corner
An inside corner lining fits between adjoining panels with returned edges and room for the fixings.
Customize your facade corners
Two-face corner molding
Molds carry the face around your measured angle or radius, so the corner has no field joint at the turn.
Returns and fixing areas
Rear returns, fixing areas and section ends are shaped around the supports and neighboring panels, with the clearances shown in the project detail.
Surface appearance across the turn
The same color, gloss and edge line continue across both faces and the returned edges visible in the joint gaps.
Corner angle and panel returns
First face and corner turn
First-face width, panel height and included angle follow the surveyed corner. Inside and outside corners require different panel orientations.

Corner wrap beside a flat panel
The two-face corner has small rear returns and edges that line up with the next flat facade panel.


