Skip to content

Custom FRP Infusion Pump Housings

The fiberglass infusion-pump case surrounds the display, keypad and loading mechanism. A separate door cover opens the loading area, with latch recesses and tubing reliefs along its edges. The rear case provides attachment areas for a separate clamp or rack; pump mechanisms, fluid paths and controls are not part of the empty case.

Low curved ivory pump casing with an empty display opening, broad overlay seat and slightly open upper door.

Separate display aperture and keypad land with upper loading-door and side-latch boundaries.

Infusion-pump case parts

Horizontal front fascia

Horizontal front fascia

A low curved front section has separate openings for the display and keypad.

Loading-door cover

Loading-door cover

A separate upper door cover follows your hinge and latch positions and opens over the pump mechanism.

Side latch and tubing return

Side latch and tubing return

A shaped end cover has a recessed latch pocket and clearance for the tubing path.

Rear mounting case

Rear mounting case

A rear casing includes the specified mounting areas for a clamp, rack or device frame.

Customize the pump case

Front fascia

The low curved fascia is molded with keypad recesses and a display opening placed to your control layout.

Door and tubing clearances

The door edge follows the loading opening, while latch pockets and tubing reliefs leave space for the separate mechanism and tubing.

Rear mount and surface appearance

Reinforced fixing areas connect the rear case to the selected clamp or rack. A matching color, gloss and texture can be applied across the cover parts.

Opening sizes and case parts

Display, keypad and mountingDisplay-opening width describes the screen aperture. Keypad-recess height measures the separate control area beside it, and mount-fixing spacing locates the housing attachments.Display opening widthKeypad recess heightMount fixing spacing

Display, keypad and mounting

Display-opening width describes the screen aperture. Keypad-recess height measures the separate control area beside it, and mount-fixing spacing locates the housing attachments.

Separated infusion pump display fascia, loading-door cover, recessed side cover and rear mounting case with joining tabs

Separate fascia, door and rear case

The case splits into a curved display fascia, a loading-door cover, a side return with a recessed latch pocket and a rear case shaped around your mounting layout.

All Medical Housings

FRP Infusion Pump Housing

Low curved ivory pump casing with an empty display opening, broad overlay seat and slightly open upper door.

Separate display aperture and keypad land with upper loading-door and side-latch boundaries.