Skip to content

Custom FRP Patient Monitor Housings

These fiberglass housings enclose a patient monitor's screen and internal electronics. The exterior can be divided into a front bezel, vented rear shell and removable covers, with openings for controls and connectors. The display, electronics and mounting bracket are not included.

Empty off-white monitor enclosure with large screen aperture, lower triangular control openings and side ventilation panel.

Front bezel, open control interfaces and returned side service panel.

Patient-monitor housing parts

Front bezel and controls

Front bezel and controls

The front surround frames the screen opening and lower control apertures.

Deep rear cover

Deep rear cover

This deep rear shell has vents and connector openings where your layout needs them.

Handle and carry shroud

Bezel with handle surround

A front cover can include a molded carry-handle surround, shaped around the separate handle frame.

Rear panel with mounting-bracket contact areas

Rear mounting panel

This rear panel has the hole pattern and openings for your mounting bracket.

Monitor housing customization

Bezel and rear-shell molding

We shape the front-frame curves and rear-shell depth to fit your screen and the space your electronics need.

Control and connector openings

Control apertures, rear vents and connector openings are positioned around the internal modules.

Handle, bracket and surface appearance

Handle shrouds cover the separate carry-handle frame, and rear panels are shaped for the selected bracket. Color and surface finish can be coordinated across the housing set.

Monitor cover references

Screen, rear depth and mountingThe front view measures the screen-opening width, and the local shell section shows front-to-back cover depth. Rear fixing spacing is measured between the marked hole centers.Screen opening widthCover depthFixing spacing

Screen, rear depth and mounting

The front view measures the screen-opening width, and the local shell section shows front-to-back cover depth. Rear fixing spacing is measured between the marked hole centers.

Separated patient-monitor screen bezel, vented rear shell, carry-handle shroud and four-hole mounting panel with connector opening

Vented rear and carry shroud

The housing can be split into a front bezel, vented rear shell, carry-handle shroud and a four-hole mounting panel with a connector opening. Separate parts let the rear shell come off for service while the front bezel stays in place.

All Medical Housings

FRP Patient Monitor Housing

Empty off-white monitor enclosure with large screen aperture, lower triangular control openings and side ventilation panel.

Front bezel, open control interfaces and returned side service panel.