Skip to content

FRP Outdoor Instrument Housings

Our fiberglass field housings cover outdoor instruments and accommodate their pipe or cable connections. Split versions open around connections that stay in place, while a windowed face allows readings with the housing closed. Mounting areas can suit pole, wall or frame supports.

Light-gray field-instrument enclosure mounted on a post, with a front viewing window and diagonal service seam.

Viewing-window contact, clamshell service seam and support mounting.

Instrument housing options

Viewing-window clamshell

Windowed clamshell

The housing splits open around the instrument, with a window for reading it in place.

Front service door

Front service door

A hinged front door opens the housing for calibration or instrument replacement.

Opaque protection cover

Opaque cover

An opaque cover suits instruments whose readings are taken from a remote display.

Rear split around connections

Split rear shell

The rear shell separates around retained pipes or supports, creating a removal route that leaves those connections in place.

Housing details made to order

Shell and window rim

Split shell sections and window rims are molded with reinforcement at the pole, wall or frame mounting points.

Cable entries and service seam

Cable and fitting passages follow the connection layout. The service seam is prepared for the specified seals and latches.

Color and finished edges

The exterior is finished in your color and texture, with clean edges at the window, cable entries and seam faces.

Viewing window and instrument fit

Viewing opening and internal fitThe face view locates the viewing opening and two marked connection centers. The separate cutaway measures inside height between the inner roof and floor faces.Viewing opening widthInside heightConnection spacing

Viewing opening and internal fit

The face view locates the viewing opening and two marked connection centers. The separate cutaway measures inside height between the inner roof and floor faces.

Rounded outdoor instrument housing with upper and lower split shells and a rectangular viewing opening

Rounded split housing with window

Curved upper and lower shells meet at a service split, with the viewing opening placed over the instrument display.

All Industrial FRP

FRP Outdoor Instrument Housing

Light-gray field-instrument enclosure mounted on a post, with a front viewing window and diagonal service seam.

Viewing-window contact, clamshell service seam and support mounting.