Fiberglass Rainscreen Cladding Panels
We mold fiberglass outer panels for rainscreen facades from your surface model. Flat, curved or wavy faces come with returned edges, matching corners and opening surrounds. The panels are the outer skin only; cavity drainage, fire strategy, supports and facade testing are set by your facade designer.

Undulating fiberglass rainscreen panels with visible surface relief and panel joints.
Image credit: Henrik Kam, courtesy SFMOMA — Kreysler & Associates ·
Choose your outer-panel shape

Planar cassette face
A flat panel has returned edges sized to your support grid and joint layout.

Curved outer surface
Curved faces follow the building outline, leaving the cavity depth you need for supports behind the panel.

Relief or undulating face
Raised or wavy faces add depth to the wall, and panel edges are shaped so the pattern continues across joints.

Special perimeter pieces
Dedicated molded pieces finish corners, openings and wall ends where the repeating panel shape cannot continue.
Customize the outer cladding
Molds from your facade model
Molds reproduce the approved surface model, from repeated flat cassettes to one-off curves and raised relief.
Returns and perimeter pieces
Edge returns, corners and opening surrounds are made to the sizes and joint shapes of your wall design.
Face and edge surface appearance
Color, gloss and texture are matched to your sample across panel faces and exposed returns.
Outer-panel size and joining edges

Finished fiberglass rainscreen panels with their reverse-side support frames visible.
Image credit: Henrik Kam — SFMOMA ·

A curved fiberglass rainscreen facade with visible panel divisions.
Image credit: SFMOMA151 — New SFMOMA · CC BY-SA 4.0
Panel size and cavity offset
Panel width, height and the distance from the face to the backing wall follow your cladding layout.
Joints between adjoining panels
Returned edges and joint profiles are shaped to meet the adjoining panels in your facade design.


