Custom FRP Sterilizer Outer Covers
We mold fiberglass shrouds, control fascias and lower trim for sterilizer cabinets, with removable side panels for service access. Laminate construction is selected for exterior temperature and cleaning exposure. The sterilization chamber, pressure boundary and complete-unit thermal validation remain separate from the outer covers.

Benchtop sterilizer exterior showing the front door, separate control strip and side cooling slots.
Image credit: ·
Sterilizer cover parts

Wraparound exterior shroud
This combined top-and-side outer cover has an open lower mounting edge.

Independent control fascia
The front strip has display and control openings.

Removable side panel
This removable side piece has the specified vent slots and fixing areas.

Lower trim module
This shaped trim finishes the cabinet front below the door.
Customize the sterilizer covers
Wraparound-cover molding
The molds for the top curve, side depth and lower trim are made around your sterilizer cabinet.
Door and control cutouts
The display, control and door-clearance apertures are trimmed to your cabinet drawing.
Removable side panels
Vented side panels have fixing points matched to the cabinet and can be removed for service. We finish them in the specified exterior color.
Sterilizer outer-cover references
Exterior size around the cabinet
The front elevation marks cover width and height. The plan below measures depth from the front edge on the left to the rear edge on the right.

Wraparound shroud and control strip
A top-and-side shroud, separate control strip and curved lower trim enclose the cabinet, with vented side panels that can be removed for service.


