Custom Fiberglass Truck Sleeper Roofs
A fiberglass sleeper roof forms the top of the truck cab, with a shallow, raised or stepped crown. Its lower edge fits a separate structural cab ring, while vent, skylight or HVAC openings follow the equipment layout. The inside face can be prepared for a liner.

Roof crown, returned corners and the open lower cab transition on a detached sleeper cap.
Image credit: ·
Choose your sleeper-roof profile

Shallow crown cap
This low crown has rounded corners and ends at the specified cab cut line.

Raised headroom crown
This taller crown adds headroom over the sleeper area.

Stepped front transition
A lower front brow rises through a curved step to the taller rear sleeper section.

Vent or skylight opening
This skylight or vent opening has a mounting edge and seal surface for the unit you specify.
Customize the sleeper roof shell
Crown and brow molds
Custom molds reproduce your sleeper roof’s changing height, rounded corners and front step, with returns along the lower perimeter.
Cab-ring edge and roof openings
The lower edge follows your cab cut and ring, and skylight, vent or HVAC openings have mounting edges for the parts you specify.
Exterior and liner-facing surface
We supply the outer face in gelcoat or paint-ready form and can leave the inner face as molded or prepare it for your liner.
Sleeper roof details
Shell size and cab opening
The front view marks overall roof span and shell height from the lowest lower-edge level to the crown. The opening width is measured along the flat upper edge of the cab cutout.

Roof-to-ring edge
The lower returns and contact areas are shaped to sit on your cab ring and line up with the interior liner.


