Skip to content

Custom Fiberglass Van High-Roof Shells

A fixed fiberglass high-top raises the roof line of a van conversion. We mold a continuous crown or a stepped brow above the cab, with lower mounting returns shaped to the separate conversion frame. Vent and window openings can be factory-trimmed or supplied with cutting allowance for the build.

White untrimmed fiberglass van high-top roof shell with a stepped side shoulder and visible laminate fringe along its lower perimeter.

Raised crown and stepped wall geometry before the high-top shell's final perimeter trim.

Van high-top options

Continuous high crown

Continuous high crown

A full-length raised crown has a smooth front transition and long lower mounting edges.

Stepped front brow

Stepped front brow

The lower brow over the cab steps up into the taller rear living or working area.

Defined roof vent aperture

Roof-vent opening

This crown opening has mounting and sealing edges for your roof vent.

Defined side-window shell

Side-window roof shell

The side-window openings are placed to suit the interior layout, with edges shaped for the window frames and glass you specify.

Customize the van high-top

High-top molds

Custom tooling forms the long crown, stepped front and deep sidewalls from your roof model, with lower returns fitted to the conversion frame.

Vent and window openings

We form mounting edges around the vent and window openings. These openings can be trimmed to size at the factory or left with allowance for final fitting.

Perimeter and surface appearance

The mounting returns are shaped to the conversion frame, with gelcoat or paint-ready exteriors and an inner face prepared for your liner.

Van high-top references

Roof profile and mounting returnThe side view marks shell length and height above the lower mounting edge. The corner section measures the usable flat return from the inner wall face to its free edge.Shell lengthShell heightMounting return width

Roof profile and mounting return

The side view marks shell length and height above the lower mounting edge. The corner section measures the usable flat return from the inner wall face to its free edge.

Long raised van roof shell with rectangular crown opening, surrounding vent edge and lower conversion-frame reference

Roof vent and frame contact

Custom vent openings have mounting edges around them, and the lower perimeter is matched to your conversion frame.

All Vehicle FRP

FRP Van High Roof Shell

White untrimmed fiberglass van high-top roof shell with a stepped side shoulder and visible laminate fringe along its lower perimeter.

Raised crown and stepped wall geometry before the high-top shell's final perimeter trim.