Skip to content

Custom Fiberglass Trunk Lid Shells

Fiberglass trunk-lid skins form the upper cover and downturned rear face of a boot. They can fit a separate hinged inner frame or be made as removable pin-on lids, with lock, light or camera openings as needed. Closure hardware remains separate from the skin.

White fiberglass trunk lid outer shell with subtle side character lines and one round lock hole in its downturned rear face.

Upper crown and downturned closing face of a detached fiberglass trunk lid skin.

Choose your trunk-lid format

Plain outer skin

Plain outer skin

A shallow crown turns down at the rear, with perimeter edges following the boot opening.

Defined lock and lamp openings

Lock and lamp openings

Custom lock, license-light or camera openings sit in the lid’s rear closing face.

Skin with defined inner frame

Skin with separate inner frame

The outer skin joins a separate inner frame at the hinge and latch mounting areas in your design.

Removable pinned lid

Removable pinned lid

This removable lid is held by pins at defined locations instead of hinges.

Customize the trunk lid shell

Crown and closing-edge molds

Custom molds reproduce your lid crown, downturned rear face and perimeter returns from the supplied body model or original sample.

Hardware openings and inner contacts

Lock, lamp or camera openings are cut to your layout. We add contact areas for the inner frame, hinges and latch, or local backing for pin-on retention.

Gelcoat or paint-ready skin

We supply gelcoat or paint-ready outer faces, with the underside prepared for joining to the inner frame.

Trunk lid references

Crown and hinge positionsThe plan marks maximum lid width and the fore-aft footprint of the crown, excluding the downturned rear face. The two marked hinge-area centers define their spacing.Maximum lid widthCrown plan lengthHinge spacing

Crown and hinge positions

The plan marks maximum lid width and the fore-aft footprint of the crown, excluding the downturned rear face. The two marked hinge-area centers define their spacing.

Trunk lid shell with shallow crown, downturned rear face, two hinge reference areas and central latch reference area

Closing face and inner contacts

On the hinged version, hinge areas sit toward the front edge and a central latch area lies at the rear closing face. Perimeter returns join the skin to the separate inner frame.

All Vehicle FRP

FRP Trunk Lid Shell

White fiberglass trunk lid outer shell with subtle side character lines and one round lock hole in its downturned rear face.

Upper crown and downturned closing face of a detached fiberglass trunk lid skin.