Skip to content

Custom Carbon Fiber Industrial Roller

For machine projects targeting lower rotating mass, we make custom carbon roller bodies with the journals and working surface your design requires. Supply can cover a hollow sleeve or an agreed fitted assembly, coordinating face length, tube construction and end connections. The working span, loading, speed and permitted deflection define the component specification; bare, coated and covered faces are available as agreed.

Three parallel woven-carbon industrial rollers with silver end plates, exposed near journals, shaft-end bores and one visible green seal ring

Composite working faces and controlled metal journal contacts shown as complete roller components.

Roller configurations

Roller with fixed journal fittings

Roller with fixed journal fittings

This carbon tube has fixed end fittings and journals for your bearing or support arrangement.

Hollow composite roller sleeve

Hollow composite roller sleeve

This hollow carbon sleeve fits the end fittings or mandrel you supply.

Process-coated working face

Process-coated working face

This roller body has a separate coating or covering on the working surface.

Roller with defined drive interface

Roller with defined drive interface

This roller has one plain journal and a flanged drive-end connection made to your design.

Roller supply options

Body section for the roller duty

Diameter, face length, wall construction and laminate are specified together for the working span, load, operating speed and permitted deflection in your roller design.

Machine connections

The journals and drive-end connections are made to suit your bearings and drive.

Working surface

We provide bare carbon, or a coating or covering you specify for the material the roller handles.

Roller size and end connections

Working face and journal reachThe upper view marks the working-face length and roller diameter. The enlarged side detail below measures journal reach along the shaft axis, from the body-end shoulder to the shaft tip.Working lengthRoller diameterJournal reach

Working face and journal reach

The upper view marks the working-face length and roller diameter. The enlarged side detail below measures journal reach along the shaft axis, from the body-end shoulder to the shaft tip.

Cylindrical roller body with end fittings and projecting journals at both ends

End fittings and journals

End fittings connect the carbon tube to its journals. The journals sit in the machine's bearings, with a separate drive connection included on a driven version.

All Carbon Fiber

Carbon Fiber Industrial Roller

Three parallel woven-carbon industrial rollers with silver end plates, exposed near journals, shaft-end bores and one visible green seal ring

Composite working faces and controlled metal journal contacts shown as complete roller components.