Carbon Fiber Machine Beams
Custom hollow carbon beams for machine axes and automation structures where member mass and stiffness matter. The section and laminate follow your approved beam design, while rail pads, end fittings and cable routes are coordinated with the machine assembly. Choose a machining blank or the agreed prepared component, with dimensional acceptance tied to the specified mounting datums.

Equipped hollow beam with rail-contact pads and a machined end connection.
Image credit: ·
Beam supply options

Hollow beam with machined rail pads
This hollow rectangular beam has rail pads and end connections.

Bare rectangular beam blank
This rectangular beam blank has machining allowance for your own finishing.

Beam with bonded end interfaces
This beam has bonded metal end flanges, drilled to your connection design.

Beam with internal service route
This hollow beam has side openings and a cover plate for routing cables inside.
Machine beam supply
Section and laminate for the machine duty
Beam span, section and laminate construction follow the approved component design and its mass, bending and torsional-stiffness requirements.
Rail pads and end fittings
Guide-rail pads and metal end fittings are located from shared assembly datums, with their joining and machining requirements defined for the carbon beam and mating machine structure.
Blank or prepared beam
A blank retains material for later machining. A prepared beam includes the selected mounting areas and service openings.
Beam section and mounting faces
Beam length and rail-pad spacing
Beam length follows its span within the machine. Section height describes the hollow profile, and rail-pad spacing locates the mounting faces along the top.

Rail pads and side openings
The hollow beam can carry rail pads on top, side openings for cables and prepared ends for your connections.


