Carbon Fiber Telescope Tubes
The carbon tube forms the body around a telescope's optical assembly. Plain tubes can be left for further machining, or supplied with a focuser opening, fixing holes and reinforced ends for separate optical cells. Length, bore and external support areas follow the telescope layout.

Close view of a carbon telescope tube end with a large focuser opening, located mounting holes and dark hollow bore.
Image credit: ·
Optical tube options

Tube with focuser aperture
This tube has one focuser opening and the surrounding mounting holes already cut.

Bare hollow tube
An unmachined hollow tube provides the body for subsequent openings and end fittings.

Tube with end-cell mounting areas
This tube has reinforced ends where the separate optical cells mount.

Tube for external support rings
The outer tube surface fits separate removable support rings or saddles.
Optical tube customization
Tube dimensions
Bore and length set the internal space, while the end sections meet the selected optical cells.
Focuser and cell mounts
We provide focuser openings, mounting holes and reinforced ends taken from your assembly drawing.
Inner and outer surfaces
We finish the outer carbon surface and can add the interior blackening or lining in your specification.
Optical tube size and openings
Tube length and focuser position
The axial side view measures tube length between corresponding end faces and diameter across the outside surface. Focuser position runs from the left end face to the marked aperture center.

Side opening and end contacts
The side focuser opening and end mounting areas are prepared for the focuser and optical cells you have selected.


