Carbon Fiber Tripod Tube Stages
Carbon tripod tubes form the sliding sections of a telescopic leg. Successive diameters nest inside one another, with enough overlap for the selected lock arrangement. We supply individual tubes or paired stages, with end details for separate collars, feet and upper pivot fittings.

Carbon tripod bottom leg tube with a single upper lock collar and lower rubber foot.
Image credit: ·
Tripod leg components

Bottom leg with defined foot contact
This bottom leg tube has ends prepared for your upper lock collar and foot.

Bare nested tube section
This plain hollow tube fits the locks, shims and fittings you source separately.

Two-stage sliding leg section
The two nested stages have your sliding overlap and the lock arrangement between them.

Tube with specified upper joint fitting
This tube is prepared for the upper pivot connection in your tripod design.
Tripod tube customization
Nested tube sizes
We make the carbon stages to your diameters, lengths and sliding overlap, so each section nests into the next.
Lock and fitting contacts
The tube ends are prepared for your collars, shims, feet and upper joints.
Tubes or leg sections
Individual tubes can be supplied separately, or two nested stages can form a sliding leg section.
Leg stage size and fittings
Tube diameter, length and overlap
The left axial section shows one tube's full length and outside diameter. The right cutaway shows the inner stage extending into the outer tube; overlap runs from the inserted inner end to the outer tube's mouth.

Lock-collar and foot contacts
The upper end is prepared for lock engagement and the lower end for the foot, to suit the fittings in your leg assembly.


