FRP Blower Casings & Covers
A fiberglass scroll casing forms the blower's air passage around the wheel. Inlet sections, removable inspection faces and exterior canopies can be supplied to the same assembly layout, with the shape, duct connections and base fixings made to the equipment drawing.

Empty blower scroll casing with a circular inlet, discharge flange and bolted inspection cover. The wheel and drive assembly are fitted to the separately specified equipment design.
Image credit: ·
Blower casing and cover options

Scroll casing
A scroll-shaped shell carries air from the round inlet to the outlet flange.

Inlet bell
A separate circular inlet section joins the duct flange to the blower casing.

Bolted inspection face
A removable bolted face opens the casing for internal inspection and cleaning.

Exterior canopy
An outer canopy covers the whole machine, with vent and service openings.
Blower casing manufacture
Scroll and inlet molding
Curved casing and inlet sections are molded to your wheel clearance, outlet angle and base layout.
Flange and hatch fitting
Trimmed flange faces, section joints and inspection edges are matched to adjoining ducts and specified hardware.
Resin and inner lining
Resin and inner lining are selected for the specified gas, temperature and cleaning conditions.
Inlet, outlet and inspection details
Inlet, outlet and base fit
The inlet diameter and outlet width are shown at their openings. Base fixing spacing is measured between the two illustrated mounting-hole centers.

Scroll casing and inspection hatch
Inlet and outlet flanges are made to your duct connections, with a removable inspection hatch in the scroll casing.


