Skip to content

Custom Fiberglass EV Door Shells

The fiberglass outer skin gives an EV door its exterior shape, while a separate inner shell provides attachment areas for the door equipment. Framed and frameless versions can be made as left and right parts. Closure loads and side-impact validation remain part of the vehicle design program.

Standalone off-white fiberglass door shell with sloping glazing frame, empty window aperture and molded exterior handle recess

Molded door shell with defined glazing and handle interfaces.

Choose your door-shell format

Framed door shell

Framed door shell

The outer face runs up into a molded window frame that follows the glass shape in your design.

Separate exterior skin

Separate exterior skin

This exterior skin has turned-back edges for attachment to the inner door structure in your design.

Frameless upper edge

Frameless upper edge

The molded face stops below the glass, with a top edge shaped for your beltline seal.

Reinforced inner shell

Reinforced inner shell

This inner shell has local reinforcement where you specify it and mounting areas for hinges, latches and door equipment.

Customize your door components

Outer-skin and frame molding

The outer face and window-frame profile follow the body styling, with returned edges that meet the inner door structure.

Inner shell and hardware areas

The inner shell can include local reinforcement, hinge and latch mounting areas, service openings and faces for the door seals.

Left, right and exterior surface appearance

The matching left and right door parts have primer or painted outer faces in your selected body color and gloss.

Door size and inner-shell openings

Door size and hinge spacingDoor width and height set the fit within the body opening. Hinge spacing locates the attachments along the leading edge of the supported door assembly.Door widthDoor heightHinge spacing

Door size and hinge spacing

Door width and height set the fit within the body opening. Hinge spacing locates the attachments along the leading edge of the supported door assembly.

Framed door inner shell with a window opening, large lower access aperture and smaller hinge and latch mounting areas

Window frame and inner-shell openings

The inner shell can include the window frame, a large access opening for door equipment and mounting areas for hinges and latches.

All Vehicle FRP

FRP EV Door Shell

Standalone off-white fiberglass door shell with sloping glazing frame, empty window aperture and molded exterior handle recess

Molded door shell with defined glazing and handle interfaces.