Multi-Lane Water Slides
Our fiberglass multi-lane slide sections have two or more open channels molded side by side to your slide layout. Lane count, clear width, divider height, slope profile and lane colors follow your design. Supports, start platforms and water supply are engineered as part of your overall slide design.

Four straight fiberglass slide channels in blue, green, yellow and red with raised white dividers and launch handrails
Image credit: ·
Multi-lane channel options

Two-channel bank
Two open lanes share a central divider, with end joints matched to the next section.

Four-channel bank
Four adjoining lanes have repeated dividers and the same slope profile across the bank.

Common gradient transition
A common transition changes slope at the same point in every lane, easing the bank into the final run.

Segmented lane assembly
The lane bank is split along its length into sections. Flanges join the sections across all lanes at the specified positions.
Customize the lane bank
Lane count and width
Each bank can contain two, four or another specified number of lanes, with individual widths taken from the slide layout.
Matched slope profile
Slope changes and divider shapes are matched across neighboring lanes along the whole route.
Sections and lane colors
Transverse joints divide the bank into sections, and each lane can have its own molded color.
Lane bank size and divider layout
Bank width, divider height and clear lane width
The cross-section measures the full bank width and the inner width between the vertical channel walls. Divider height runs from the flat channel floor to its top edge.

Adjoining channels and dividers
Lane count and divider shape follow your design, and section joints line up across the full width of the bank.


