Skip to content

Telecom Equipment Cabinets

These fiberglass cabinets house outdoor network equipment and backup batteries. We mold the rack bay, service doors and cable-entry base to the equipment layout, with optional side mounting for a separate cooling unit.

Gray fiberglass telecom cabinet with one front service door, a high side vent and roof lifting brackets.

Fiberglass telecom cabinet with front service door and side ventilation opening.

Telecom cabinet layouts

Single rack bay

Single rack bay

A single front door opens the full rack face for routine service.

Twin service doors

Twin service doors

Twin doors open across the network rack and the lower power-equipment space.

Side cooling interface

Side cooling opening

A reinforced side face has mounting areas for a separately supplied cooling unit or vent.

Battery and cable plinth

Battery and cable plinth

A lower plinth zone is kept clear for backup batteries and incoming cables.

Telecom cabinet manufacturing services

Cabinet and support molding

Cabinet depth, door rims and the lower battery section are molded with reinforced mounting areas for the rack and cooling unit.

Equipment fitting preparation

Cable and cooling openings are trimmed to your drawings, with the rails, seals and door hardware you specify fitted.

Interior and casing surface appearance

We finish the inner surfaces and seal trimmed cable-entry edges. The exterior color follows the approved sample.

Telecom rack and cooling-unit fit

Rack rails and cable-entry zoneRail spacing follows the selected rack. The gray equipment outline and cable-entry plate define the cable-zone height below the equipment; that dimension alone does not establish a cable bend radius. The side opening matches the separate cooling unit.Rack rail spacingCable zone heightCooling opening height

Rack rails and cable-entry zone

Rail spacing follows the selected rack. The gray equipment outline and cable-entry plate define the cable-zone height below the equipment; that dimension alone does not establish a cable bend radius. The side opening matches the separate cooling unit.

Tall telecom cabinet with a plain front service door and a long rectangular side cooling-unit opening

Front door and tall side opening

The front service door, cabinet depth and tall side opening are set to suit your rack and the cooling unit mounted on the side.

All Industrial FRP

FRP Telecom Equipment Cabinet

Gray fiberglass telecom cabinet with one front service door, a high side vent and roof lifting brackets.

Fiberglass telecom cabinet with front service door and side ventilation opening.