A delivery-box body and lid developed as a pair.
Custom fiberglass container shells sized for your payload and carrier, with matching rim profiles and preparation for the closure fittings you select.
The closure rim, useful inside space and carrier fixing areas follow one box arrangement.

- Components
- Matched body and lid
- Mounting
- Custom carrier interfaces
- Hardware
- Hinges, latches and seals supplied when quoted
Fit the load, the closure and the carrier.
A delivery box has to hold the goods while staying within the space allowed by its vehicle or carrier. The lid needs to open in that setting, close against the body and leave room for the chosen hinges, latch and seal.
Useful load space inside a fixed envelope
The box needs room for the specified parcels or trays while staying within the carrier’s available space.
A lid closing against a molded rim
The two edges must meet with space for the chosen hinge, latch and any specified seal.
Loads at the carrier contacts
Attachment areas need local construction that follows the mounting bracket and carrying arrangement.

How we customize the parts.
Usable load space
We size the inside to the parcels or trays you carry and the outside to the space available on the vehicle. Any liner or insulation is allowed for in both.
A lid that matches the body rim
The lid overlaps a returned rim on the body, with clearance for a seal where one is specified. The body and lid are trimmed and checked as a pair before any hinges or latches are fitted.
Reinforced where it mounts
Local reinforcement is added where the box meets your carrier bracket. Shelf and liner supports are agreed at the same stage, so their fixing points are built into the shell.


Mold the body and lid
Both shells are molded with matching rim profiles and the agreed reinforcement. They are trimmed and checked together before any fittings are installed. We ship the pair as bare shells or with the quoted hardware and interior parts fitted. Rims and visible faces are protected for transport.
Matched edges before the fittings go on.
Paired body and lid references let the closure be reviewed before the selected fittings are added. The mounting areas and usable space also follow the carrier, reducing separate layout decisions during assembly.

Closure edges reviewed as a pair
The body rim and overlapping lid follow one arrangement.
Prepared carrier contacts
Reinforced areas match the selected mounting bracket.
Usable space considered first
Internal clearances account for the load and any specified liner.
Dimensions and design options
- Product family
- Custom FRP Delivery Boxes
- Production basis
- Approved drawing or sample
- Liner/insulation
- Optional, allowed for in the internal volume
- Surface appearance
- Brand color and graphic areas to your sample
Delivery box layouts

Top-opening lid
A top lid lifts for loading from above and leaves the front wall uninterrupted.

Front-loading body
A front opening lets trays and parcels slide in without being lifted over the rim.

Lined box interior
A separate liner, such as an insulation layer, sits inside the shell. Its thickness is allowed for when sizing the usable volume.

Divided storage
Shelves and partitions keep parcels apart, with removable dividers where specified.
Box size and carrier fit
Box and loading dimensions
Outer width, clear opening height and carrier fixing spacing are set from your load and the carrier rack.

Matched lid and body
The lid sits on a returned body rim, and the lower mounting feet are shaped to sit on your carrier.