FRP Dosing System Enclosures
These fiberglass enclosures house chemical-dosing equipment, with an open service bay or doors around the pump compartment. Pump shelves, pipe and cable openings, and a separate refill bay can be arranged to suit the skid. Resin and corrosion-barrier surfaces are selected for the reagent exposure and operating temperature. Pumps, tanks and plumbing remain separate equipment.

Returned front rim, deep equipment bay and lower pump-mounting contact.
Image credit: ·
Dosing enclosure layouts

Open-front dosing bay
An open-front equipment bay has pump mounting areas and a returned front edge.

Door-front enclosure
Two front doors close over the pump compartment and open for servicing.

Skid surround
Separate wall and roof panels fit around the dosing skid.

Separate refill bay
Refill and pump areas open separately, so chemical refilling does not require opening the pump compartment.
Dosing enclosure fabrication
Enclosure molding
Walls, roof and bay edges are molded with added reinforcement where the enclosure meets the skid and carries equipment.
Pump and pipe fit
Pump mounting areas, refill access and pipe or cable openings are placed to match your dosing layout.
Resin selection
The resin and corrosion barrier are specified for the chemicals you dose and their temperature. The exterior is molded in your color.
Pump bay and pipe openings
Working bay and pump shelf height
The front elevation measures the clear service bay and the pump-shelf level above the enclosure base. The separate detail shows the diameter of a round pipe opening.

Recessed bay with pump shelf
The open service bay includes a pump shelf, an upper side slot and round side or floor openings for pipe and cable runs, each positioned to your layout.


