Skip to content

FRP Process Pipe Covers

Our FRP outer covers protect insulated process pipes, with open-bottom arches, split jackets and enlarged sections around elbows, flanges and valves. Joints and edge fixings allow individual sections to open or lift away for inspection where the removal path is clear. The process pipe and insulation are specified separately.

Empty off-white half-round protective cover assembly with raised segment joints and metal edge clips

Open underside, curved removable segments, transverse joints and accessible edge fixings.

Process pipe cover sections

Straight half-round section

Half-round section

A half-round shield covers a straight pipe run, with an open underside and fixings along its edges.

Split cylindrical jacket

Split cylindrical jacket

Upper and lower shells form a removable jacket around the insulated pipe.

Flange service box

Flange service box

An enlarged section clears flanges and bolts and leaves room to remove it for service.

Route-change shield

Route-change shield

A shaped cover follows an elbow and joins removable sections along the adjoining straight runs.

Cover details made to order

Molded sections

Curved shells and enlarged service boxes are molded to the pipe radius, insulation thickness and changes in direction.

Joints and fixings

Split edges are trimmed, clip areas are reinforced and drain cutouts are added, so sections can be removed and refitted.

Surface appearance inside and out

Inner edges and mounting contacts are finished for the specified installation, with the chosen gelcoat color on the outside.

Pipe cover sizing and joints

Section length, rise and crown gapThe left cross section shows cover rise above the open-edge plane and the crown gap to the insulation envelope. The right elevation measures the section along the pipe axis. Fitting access and the space to remove sections follow the pipe and maintenance layout.Section lengthCover riseCrown gap

Section length, rise and crown gap

The left cross section shows cover rise above the open-edge plane and the crown gap to the insulation envelope. The right elevation measures the section along the pipe axis. Fitting access and the space to remove sections follow the pipe and maintenance layout.

Open-bottom arched pipe cover made from joined sections with overlap edges

Overlapping cover sections

Open-bottom sections overlap at the joints, with removable fixings along their edges.

All Industrial FRP

FRP Process Pipe Cover

Empty off-white half-round protective cover assembly with raised segment joints and metal edge clips

Open underside, curved removable segments, transverse joints and accessible edge fixings.