Skip to content

FRP Machine Covers

We mold fiberglass covers around a machine’s shape, clearances and service points, using your drawing or a checked sample. The cover can lift off, open on hinges or separate into matching sections where a one-piece shell would be difficult to install.

Yellow molded fiberglass machine cover with open upper returns, recessed side faces and a lower service relief

Molded machine exterior cover with shaped recesses and open assembly returns.

Machine-cover arrangements

Molded machine wrap with open returnOriginal outline showing a design direction for the custom composite component.

Open-return machine shell

The molded wrap has returned edges and an open underside around the machine frame and adjoining parts.

Hinged service hood

Hinged service hood

A hinged hood opens above the machine, with latch and travel-stop positions suited to the layout.

Removable access panel

Removable access panel

A small removable panel gives access to frequently serviced parts without removing the main shell.

Matched split covers

Matched split covers

Matching shell pieces separate around equipment that cannot pass through a one-piece cover.

A cover shaped for your machine

Profile and inside space

Curves, recesses and return edges are taken from your cover drawing or a physical sample.

Access and attachment

We place service openings and fixings around the machine, with hinged, lift-off or split sections for the required access.

Outer and inner surface appearance

We apply the specified gelcoat or paint outside, finish the inner face and reinforce the fixing areas.

Molded cover and machine clearance

Cover size and machine clearanceThe section marks outside cover width and height. The inner rectangle represents the machine envelope, and C marks the gap between that envelope and the inner crown of the cover.Cover widthCover heightC

Cover size and machine clearance

The section marks outside cover width and height. The inner rectangle represents the machine envelope, and C marks the gap between that envelope and the inner crown of the cover.

Molded machine cover with a broad rectangular opening, sloped returned edges and smaller rectangular service or fixing areas

Returned opening and local features

The broad opening, shaped return edges and smaller service or fixing areas are laid out to match your machine.

Reference forklift-cover size
820 × 580 × 150 mm
All Industrial FRP

Custom FRP Machine Covers

Yellow molded fiberglass machine cover with open upper returns, recessed side faces and a lower service relief

Molded machine exterior cover with shaped recesses and open assembly returns.